Open

Flow configuration

Description of the flow. Description will be shown in the descriptive table - the column Name.

(Description may be defined from the picture script using the function %HI_SetGraphInfo).

Technical units of the flow. Description will be shown in the descriptive table - the column Name.

(Technical units may be defined from the picture script using the function %HI_SetGraphInfo).

There are the following parameters:

• Line - enable / disable drawing the line

• Fill - enable / disable drawing the fill

• Marker - enable / disable drawing markers

Selection of line type:

• Straight

• Smooth

Selection of axis that is to be assigned to the flow. Assigning an axis is performed by selection of corresponding axis number (from 1 to 20) from Axis number spin button.

Defines drawing style in regard of zero value on y-axis.

• From X axis - drawing starts from the x-axis

• Above 0 - drawing starts from 0 (zero) on y-axis upward

• Below 0 - drawing starts from 0 (zero) on y-axis downward

A color of the graphic flow is defined by selection from the color palette opened after clicking on the arrow button placed next to the example of currently selected color.

A color of the graphic flow fill is defined by selection from the color palette opened after clicking on the arrow button placed next to the example of currently selected color.

The parameter is enabled if the parameter Fill is checked.

Fill pattern of the flow is defined by selection from the list of patterns opened after clicking the arrow button placed next to the example of currently selected pattern.

The parameter is enabled if the parameter Fill is checked.

A color of markers is defined by selection from the color palette opened after clicking on the arrow button placed next to the example of currently selected color.
The parameter is enabled if the parameter Marker is checked.

Line style is being selected from the list of styles (solid line, dash line, ...).
The parameter Highlighted allows to draw the line of double width.

Selection of marker type.

The parameter Highlighted allows to draw markers of double size.

* The parameter cannot be configured in the process D2000 HI.