/
Control the Analog and Integer Output I/O Tags (AO, CO) (D2000/Work with D2000 HI/Monitoring and Controlling of D2000 System Objects)

Control the Analog and Integer Output I/O Tags (AO, CO) (D2000/Work with D2000 HI/Monitoring and Controlling of D2000 System Objects)

Controlling analog and integer outputs (AO, CO)

Clicking a graphic object with an I/O Tag of AO (Analog output) or CO (Integer output) types connected to control (the user has sufficient access rights) opens the control window that consists of two tabs:

Object status and control
Object information

Object status and control

Object status dialog window
Object status dialog window

1

Object name.

2

Object description.

3

Current value and technical units of the object.

Note: If the object is in the Default value state (see the tabs Default manual ctrl or Default automatic ctrl), there is displayed the text Default value instead of Current value.

4

Value time.

5

Object states.

6

Object value flags (user attributes). There are shown the flags, the value of which is TRUE.

7

Acknowledges the object value.

8

Limits defined for the object: <VLL, LL, HL, VHL>.

VLL - Very Low Limit (the lowest limit)
LL - Low Limit
HL - High Limit
VHL - Very High Limit (the highest limit)

9

Opens the dialog box to control the current process alarm.

10

Acknowledges given process alarm.

11

Telemetric value of the object.

Note: Value is shown if the object is in the Default value state (see the tabs Default manual ctrl or Default automatic ctrl).

12

Part of the control window for controlling the output and default value.

Opens a dynamic graph of the object.

Opens a multigraph of the object.

Edit object. Only when process CNF is running.

Inserts the object into the current page of the Browser if opened. If is not opened, clicking the button opens it and inserts the object into the first page of the Browser.

Copies the object name to Clipboard.

The bottom of the tab contains the tabs allowing to control the object output (the tabs Manual ctrl and Automatic ctrl) and default value of the object (the tabs Default manual ctrl and Default automatic ctrl).

MANUAL CTRL

The tab allows to set manually a value of the object along with user attributes (flags). It contains the button Activate, current object value and value time. Clicking the button Activate opens the dialog box to confirm the activation of the Manual control status for the object. After clicking the buttons Yes and Execute in that dialog box, the tab Manual ctrl has the following appearance:

1

Input edit box to type a value (text) of the output object.

2

Opens the dialog box to set flags of the output object value.

3

Depending on the Execute button, the SET button is used as follows:

  1. If the Execute button is NOT in the control window, then clicking the Set button sets up given output object value along with value flags (attributes).

  2. If the Execute button IS in the control window, then clicking the Set button just ''prepares'' given output object value along with value flags (attributes) to set.

4

Clicking the button sets up the given output object value and value flags ''prepared'' to set by clicking the button Set.

Note: The button Execute is in the control window, if the option Acknowledge is checked in the object configuration in the process D2000 GrEditor.

5

Maximum step - limit the maximum possible change of the entered parameter (step)

  • button to set the lower limit of possible change from the current value

  • value of the maximum possible change

  • button to set the upper limit of the possible change from the current value